欢迎访问《中国农学通报》，
中国农学通报

中国农学通报 ›› 2016, Vol. 32 ›› Issue (18): 176-182.doi: 10.11924/j.issn.1000-6850.casb16020032

所属专题： 油料作物； 园艺

• 工程 机械 水利 装备 • 上一篇    下一篇

弹齿滚筒式捡拾器捡拾油菜试验研究

李泓熠1,吴明亮1,2,3,罗海峰1,2,3,谢 伟1,2,3,杨文敏1,2,3,任述光1,2,3   

  1. (1湖南农业大学工学院,长沙 410128；2湖南省现代农业装备工程技术研究中心,长沙 410128；3南方粮油作物协同创新中心,长沙 410128）
  • 收稿日期:2016-02-06 修回日期:2016-06-07 接受日期:2016-04-18 出版日期:2016-06-28 发布日期:2016-06-28
  • 通讯作者: 吴明亮
  • 基金资助:
    湖南省政府重大专项“湖南双季稻区油菜早熟品种选育和机械化生产技术研究与生产示范机械化生产部分”（湘府阅[2014]35号）；湖南省科技厅平台建设项目“湖南省现代农业装备工程技术研究中心”（湘财教指[2014]10号）。

Experimental Study on Rape Picking Up of Spring-finger Cylinder Pickup Collector

Li Hongyi1, Wu Mingliang1,2,3, Luo Haifeng1,2,3, Xie Wei1,2,3, Yang Wenmin1,2,3, Ren Shuguang1,2,3   

  1. (1College of Engineering, Hunan Agricultural University, Changsha 410128;2Hunan Provincial Engineering Technology Research Center for Modern Agricultural Equipment, Changsha 410128;3The Collaborative Center for Center South Grain and Oil Crops, Changsha 410128)
  • Received:2016-02-06 Revised:2016-06-07 Accepted:2016-04-18 Online:2016-06-28 Published:2016-06-28

PDF (PC)

392

摘要： 为了降低油菜分段收获作业中捡拾损失率，将弹齿滚筒式捡拾装置安装于室内土槽台车上，模拟田间作业环境设计制作了弹齿滚筒式油菜捡拾试验台，进行了台架试验和响应面分析。得到捡拾辊转速、机具前进速度和弹齿伸入留茬深度三因素对捡拾损失率影响的回归方程的数学模型；确定了三因素中按影响捡拾损失的因素显著性顺序从大到小为：捡拾装置转速、机具前进速度、弹齿伸入留茬深度。当捡拾辊转速为90 r/min，机具前进速度为0.7 m/s，弹齿伸入留茬深度为250 mm时，捡拾性能指标达到最优。

关键词: 小白菜, 小白菜, 黄曲条跳甲, 抗虫性

Abstract: In order to reduce the loss rate in rape picking up of segment harvesting, spring-finger cylinder pickup collector was installed in the indoor soil bin trolley, and the spring-finger cylinder type rape picking up test-bed was made through simulating field work environment. The regression equation's mathematical model of the loss rate in picking up which was influenced by the pick-up roller speed, the machine forward speed and the spring-finger into stubble depth was obtained through bench test and response surface analysis. The three factors listed in a descending order according to their importance were pick-up roller speed, machine forward speed and spring-finger into stubble depth. When the pick-up roller speed was 90 r/min, the machine forward speed was 0.7 m/s, and the spring-finger into stubble depth was 250 mm, the optimum picking up performance index was achieved.

中图分类号: